# CIVIL

Showing 1-46 of 46 results
\$36.00

### CE-090 Foundations in Coastal Regions: 3 PDH

This course provides guidance on designing foundations, including selecting appropriate materials, in coastal regions.

\$12.00

### CE-068 Bases and Subbases for Concrete Pavements: 1 PDH

The Bases and Subbases for Concrete Pavements course is intended for civil engineers and other construction professionals interested in learning about Bases and Subbases for Concrete Pavements.

\$60.00

### CE-020 Concrete Construction: 5 PDH

The Concrete Construction course provides information on concrete form design and concrete mix design, reinforcement properties, as well as the procedures in batching concrete.

\$60.00

### CE-028 Extending Service Life of Existing RC Pavements: 5 PDH

The Extending Service Life of Existing RC Pavements course provides information on best practices in rehabilitation strategies for extending the service life of continuously reinforced concrete pavements

\$36.00

### CE-093 Rational Method Hydrological Calculations: 3 PDH

The course discusses Rational Method equation calculations for determination of the design rainfall intensity and time of concentration of the drainage area

\$36.00

### CE-092 Pipe Flow-Friction Factor Calculation: 3 PDH

The Pipe Flow-Friction Factor Calculation course discusses the use of the Darcy-Weisbach equation and the parameters used in the equation.

\$36.00

### CE-091 Partially Full Pipe Flow Calculations: 3 PDH

The Partially Full Pipe Flow Calculations course includes a review of the Manning equation, along with presentation of equations for a pipe of known diameter.

\$48.00

### CE-089 Manning Equation for Open Channels: 4 PDH

The Manning Equation for Open Channels course provides guidelines for uniform open channel flow, where channel slope, water velocity and water depth remain constant.

\$24.00

### CE-087 Calculation of Gas Density and Viscosity: 2 PDH

This course contains discussion of, and example calculation of, the density and viscosity of a specified gas at a given temperature and pressure.

\$48.00

### CE-088 Flow Measurements in Pipes and Ducts: 4 PDH

This course is about measurement of the flow rate of a fluid flowing under pressure in a closed conduit.  Several categories of pipe flow measurement devices are described and discussed, including some associated calculations.

\$36.00

### CE-086 Sharp Crested Weirs for Open Channel Flow Measurement: 3 PDH

This course is devoted to the more widely used sharp-crested weir.  The major emphasis is on the calculations used for flow rate over various types of sharp-crested weirs.

\$36.00

### CE-085 Wastewater Treatment III – MBR: 3 PDH

This course includes discussion of process design calculations for the membrane module used in an MBR system, for an MBR aeration tank designed to provide BOD removal and nitrification, and for a pre-anoxic tank to go with an MBR BOD removal and nitrification system.

\$48.00

### CE-084 Wastewater Treatment II – MBBR: 4 PDH

This course provides discussion of and detailed examples of process design calculations for a single stage BOD removal MBBR system, a two-stage BOD removal MBBR system, a single stage tertiary nitrification MBBR system, a two-stage BOD removal/Nitrification MBBR system a post-anoxic denitrification MBBR system and a pre-anoxic denitrification MBBR system.

\$36.00

### CE-083 Wastewater Treatment I – Activated Sludge: 3 PDH

Wastewater Treatment I – Activated Sludge course provides background on biological wastewater treatment and design calculations for an activated sludge aeration tank

\$48.00

### CE-078 Pavement Design in Seasonal Frost Conditions: 4 PDH

Pavement Design in Seasonal Frost Conditions course introduces special methods for pavement design of roads, parking and open storage areas in frost conditions

\$36.00

### CE-039 Freeze Thaw Resistance of Concrete: 3 PDH

This course discusses the freeze-thaw resistance of several “marginal” air void mixes, with two different types of air-entraining admixtures (AEA)—a Vinsol resin and a synthetic admixture.

\$15.00

### CE-069 Chemical Deicers and Concrete Pavements: 1 PDH

This course focuses on a recently recognized form of deterioration on concrete pavements referred to as chemical deicer distress.

\$36.00

### CE-080 Natural Gas Pipeline Flow Calculations: 3 PDH

This course provides information about four natural gas pipeline flow equations, along with information about the fluid properties needed and their estimation or calculation.

\$36.00

### CE-079 Design for Constructibility: 3 PDH

This course gives guidance on important consideration related to erection and construction of steel bridges, and approach to design for constructibility.

\$48.00

### CE-058 Sewer Sediment and Control: 4 PDH

This 4 PDH online course provides an integrated approach to manage the solids generated in urban wet weather flows (WWFs), both on the land surface and in drainage sewer systems.

\$24.00

### CE-073 Seepage, Slope and Settlement for Levees: 2 PDH

This course will introduce you to methods for controlling seepage and settlement in the construction of levees, and to generally acceptable guidelines for levee slopes.

\$36.00

### CE-072 An Introduction to Levee Construction: 3 PDH

This course will introduce you to design and construction of levees  for flood protection and in connection with a variety of water resources projects such as dams, reservoirs and aqueducts.

\$24.00

### CE-071 Activated Sludge Wastewater Treatment: 2 PDH

This course discusses the activated sludge process employed extensively throughout the world in its conventional form and modified forms, all of which are capable of meeting secondary treatment effluent limits at wastewater treatment plants.

\$24.00

### CE-070 An Introduction to Primary Wastewater Treatment: 2 PDH

This course will introduce you to processes and equipment for primary treatment of wastewater.

\$60.00

### CE-006 Building Terrorism Mitigation – Site Layout and Design: 5 PDH

This course discusses site-level considerations for development as mitigation measures against building terrorism.

\$12.00

### CE-022 Construction Bridge Surveying: 1 PDH

This course outlines fundamentals of bridge surveying

\$24.00

### CE-019 Bridge Concrete Decks: 2 PDH

This course provides a general description of the various concrete deck types, a discussion of the basic structural behavior of concrete decks, and an overview of major design and detailing considerations.

\$60.00

### CE-021 Restoring Small Urban Watersheds: 5 PDH

This course provides guidance on concepts and techniques for urban watershed restoration and provides a framework to evaluate subwatershed restoration potential.

\$72.00

### CE-018 Foundations in Expansive Soils: 6 PDH

This course presents guidance for selecting economical foundations on expansive soil to minimize structural distress to within tolerable levels and guidance for minimizing problems that may occur in structures on expansive soils.

\$24.00

### CE-016 Admixtures for Concrete: 2 PDH

This course gives guidance on using of concrete admixtures to ensure quality and appropriate concrete properties are achieved during design and placing of concrete mixes.

\$144.00

### CE-017 Installation of Post‐Tensioning Tendons: 12 PDH

This online course provides guidance in the design, installation, grouting and inspection of post-tensioning tendons for prestressed concrete bridges.

\$60.00

### CE-015 Geometric Design of Roundabouts: 5 PDH

Roundabouts are a common form of intersection control used throughout the world and increasingly in the United States. The course provides guidance on geometric planning and design, for single and multi-lane roundabouts.

\$96.00

### CE-014 Sustainable Concrete Pavements: 8 PDH

This course provides guidance on pavement sustainability concepts and on recommended practices for maximizing the sustainability of concrete pavements

\$60.00

### CE-013 Home Builders Guide to Earthquake Resistant Building Design II: 5 PDH

This course provides guidance on best practices for earthquake-resistant house design and construction for use by builders, designers, code enforcement personnel, and potential homeowners. It also introduces and explains the effects of earthquake loads on one- and two-family detached houses and identifies the code requirements intended to resist these loads.

\$60.00

### CE-012 Home Builders Guide to Earthquake Resistant Building Design I: 5 PDH

This course provides guidance on best practices for earthquake-resistant house design and construction for use by builders, designers, code enforcement personnel, and potential homeowners

\$84.00

### CE-008 Pavement Design for Roads, Streets, Walks: 7 PDH

This 7 PDH online course provides guidelines and criteria for the design of pavements for roads, streets, walks, and open storage areas.

\$60.00

### CE-011 Operational Safety on Airports During Construction: 5 PDH

This course provides guidelines for operational safety on airports during construction.

\$24.00

### CE-009 Deterioration of Concrete: 2 PDH

This course provides guidance on how to establish the cause or causes for distress and deterioration of concrete, and the damage that has been detected.

\$24.00

### CE-010 Skid-resistant Airport Pavement Surfaces: 2 PDH

This course contains guidelines and procedures for the design and construction of skid-resistant pavement, pavement evaluation with friction measuring equipment, and maintenance of high skid-resistant pavements.

\$48.00

### CE-007 Conduits Culverts and Pipes: 4 PDH

This 4 PDH online course provides guidance on the design and construction of conduits, culverts, and pipes, and design procedures for trench/embankment earth loadings, highway loadings, railroad loadings, surface concentrated loadings, and internal/external fluid pressures.

\$36.00

### CE-067 Frost Protected Shallow Foundations: 3 PDH

The course provides methods for designing the frost protected shallow foundation, selecting insulating materials as well as its’ limits and typical applications.

\$72.00

### CE-004 Bracing System Design: 6 PDH

This course covers a full range of topics and design examples intended to provide engineers with the information needed to make knowledgeable decisions regarding the selection, design, fabrication, and construction of bracing systems for bridges.

\$96.00

### CE-003 Transmission Lines, Towers and Substation: 8 PDH

This online course introduces you to Environmental Protection and Best Management Practices (BMPs) for planning and conducting transmission line construction and maintenance activities.

\$36.00

### CE-002 Basics of Site Work: 3 PDH

This course introduces you to the concepts of site surveys, including construction surveys, bench marks, datum, and mean sea level.

\$72.00

### CE-001 A Guide to Rainwater Harvesting: 6 PDH

This course introduces the basics of residential and small-scale commercial rainwater harvesting systems design. It is intended to serve as a first step in considering options for constructing a rainwater harvesting system or implementing a harvesting program.

\$48.00

### CE-005 Bridge Deck Design: 4 PDH

This course provides practical information regarding the decking options and design considerations for steel bridges, presenting deck types such as concrete deck slabs, metal grid decks, orthotropic steel decks, wood decks, and several others.

×