EN-007 Industrial Wastewater Collection and Treatment: 3 PDH
Description of Industrial Wastewater Collection and Treatment course
The Industrial Wastewater Collection and Treatment online PDH course is a part of the Environmental Engineering category of courses. This course provides and introduction to industrial wastewater collection and treatment. Industrial waste should be collected in a manner that avoids unsafe conditions to personnel, equipment, and facilities. Industrial wastes should either be pretreated sufficiently to be accommodated in a domestic wastewater collection and treatment system, or provided with a separate collection and treatment system. Bench scale or pilot plant treatability studies to evaluate the effectiveness of the proposed physical, chemical, or biological unit processes may be needed for design of industrial waste treatment facilities. These studies should be conducted on the waste stream, if available, or on an equivalent waste stream at another facility. As a minimum, jar tests should be conducted prior to chemical process design to determine the reactor design criteria, process control and operating strategy, sludge production, and sludge characteristics. Using new membrane technologies, consideration must be made for brine generation that can be nonhazardous and discharged directly to a publicly owned treatment works (POTW). Pilot and bench scale studies should simulate the complete series of proposed unit process treatment steps using the same wastewater sample. This will identify any adverse effects of upstream treatment processes on subsequent treatment steps.
This course will give you professional tools that will allow you to move forward in learning how to design for collection and treatment of industrial wastewater flows.
This course is intended for civil and environmental engineers and other design and construction professionals wanting an introduction to the principles of collection and treatment of industrial wastewater.
At the end of the course, you will be able to:
- Learn the characteristics of conventional and toxic pollutants;
- Learn about effluent discharge limits;
- Learn about pretreatment regulations;
- Learn about isolation and collection systems for chrome and phenol containing wastewaters, for cyanide containing wastewaters, and for mixed acid and alkaline-content wastewaters;
- Learn approaches to flow and load equalization;
- Learn the principles of equalization basin design and construction;
- Learn about limits on biological treatment processes;
- Learn the basics of bioassay procedures; and
- Learn the fundamentals of gravity and pressure collection systems for industrial wastewater.
Refunds and Cancellation Policies
The course is accepted by the Professional Engineering boards in states listed on this page. In an unlikely case the course is not accepted by the board listed on this page, we will refund the full payment and will pay for you to take another course of equivalent monetary and PDH / CEU value. For complete list of courses related to Environmental Engineering category of courses please click here.
Length of the Course / Activity
This course is intended to be studied at self-pace and it should take on average of 3 hour to read and be able to comprehend the material to successfully past the online quiz.
To receive the certificate of completion for the above 3 PDH online course, you will need to take a 15-question multiple choice quiz based on the reference material supplied and pass with minimum score of 70%. There is no time limit for the quiz and it can be taken multiple times until a passing score of 70% is achieved.
Certificate of Completion
Once you achieve a passing score of 70% on the quiz you will receive and be able to print your Certificate of Completion as a record of your continuing education. PDH Star will keep a record of your certificate for the duration as required by your state of licensure. You will be able to log on to your account and view and print your past Certificate of Completion.
This course is accepted in all states mandating continuing education:
AK, AL, AR, DE, FL, GA, IA, ID, IL, IN, KS, KY, LA, MD, ME, MI, MN, MO, MS, MT, NC, ND, NE, NH, NJ, NM, NV, NY, OH, OK, OR, PA, SC, SD, TN, TX, UT, VA, VT, WI, WV, and WY
For detailed state by state requirements click here.
Do you need help choosing the right course or package for you? Please give us a call or send us an email and we will be happy to provide guidance on which courses are most relevant for you and create a customary course package.
- Lectures 1
- Quizzes 1
- Duration 3 hours
- Skill level All levels
- Language English
- Students 1
- Certificate Yes
- Assessments Self
EN-007 Industrial Wastewater Collection and Treatment